Sensor DIM LED drivers are innovative products integrated with HF motion detection, daylight sensors and LED power supply.

The products supply a simple energy-saving solution for LED ceiling lights. All control parts are integrated in the same housing, this reduces overall costs making for a faster overall paypack period.

Features:
• Integrated microwave motion sensor, daylight sensor and LED power supply
• Automatic switching and dimming based on motion and light level
• Detection area, time delay and daylight threshold can be precisely set via DIP switch


Our new solution provides ON-OFF and step dimming functions for LED lighting, users can select the right function according to different applications.

With sufficient ambient light, the sensor does not switch on the lamp
With insufficient ambient light, the sensor switches on the lamp when motion is detected
After hold time, the lamp gradually dims down if no motion is detected



With sufficient ambient light, the sensor does not switch on the lamp
With insufficient ambient light, the sensor switches on the lamp when motion is detected
After hold time, the sensor dims the lamp at a low light level if no new motion trigger
After standby period, the sensor switches off the lamp if no motion is detected in its detection zone








Wall mounting pattern (Unit: m)
Suggested installation height: 1-1.8m
Ceiling mountin pattern (Unit: m)
Suggested installtion height: 2.5-6m




Model NO. PD40C-P PD65C-P
Operating voltage 100~277Vac, 50/60Hz 100~277Vac, 50/60Hz
Output constant current 1000mA (Max) 1500mA (Max)
Output voltage 30-42Vdc 30-42Vdc
Efficiency ≥86% ≥86%
Power Factor ≥0.9 ≥0.9
HF System 5.8GHz±75MHz, ISM wave band 5.8GHz±75MHz, ISM wave band
Transmitting Power <0.2mW <0.2mW
Power Consumption ≤1.5W (standby) ≤1.5W (standby)
Detection Zone Max. (DxH) 16m x 6m 16m x 6m
Detection Sesitivity 10% / 50% / 75% / 100% 10% / 50% / 75% / 100%
Hold Time 10s / 90s / 3min / 10min 10s / 90s / 3min / 10min
Corridor Function 0s / 30s / 10min / +∞ 0s / 30s / 10min / +∞
Daylight Sensor 5lux / 15lux / 50lux / Disable 5lux / 15lux / 50lux / Disable
Standby Dimming Level 20% / 35% 20% / 35%
Mounting Height 6m Max. 6m Max.
Motion Detection 0.5~3m/s 0.5~3m/s
Detection Angle 150° (Wall installtion)
360° (Ceiling installation
150° (Wall installtion)
360° (Ceiling installation
Working Temperature (Ta) -20°C~50°C -20°C~50°C
Size (LxWxH) 190 x 40.5 x 22.8mm 190 x 40.5 x 22.8mm
IP Rating IP20 IP20




By selecting the combination on the DIP switch, sensor data can be precisely set for each specific application.

  1 2  
100%
75%
50%
10%
Detection Area
Detection area can be reduced by selecting the combination on the DIP switches to fit precisely each application
  3 4  
10s
90s
3min
10min
Hold Time
Refers to the time period the lamp remains at 100% illumination after no motion detected.
  5 6  
Disable
50lux
15lux
5lux
Daylight Sensor
The sensor can be set to only allow the lamp to illuminate below a defined ambient brightness threshold.

When set to disable mode, the daylight sensor will switch on the lamp when motion is detected, regardless of ambient light level. 50lux: twilight operation, 15lux, 5lux: darkness operation only.
  7 8  
0s
30s
10min
+∞
Corridor Function (standby period)
Refers to the time period the lamp remains at a low light level before it completely switches off in the long absence of people.

When set to the "+∞", the low light is maintained until motion is detected. When set to the "0s", the light will turn off after hold time.
  9  
35%
20%
Standby Dimming Level
The low light level you would like to have after the hold time in the long absence of people.